BLACKCOMB HO 5.1 B

NSF validated UV water treatment system

Looking for a comprehensive UV water treatment system in higher flow rates? Consider LUMINOR's NSF Class B BLACKCOMB-HO 5.1 line of "Residential Crossover" UV systems.

Equally comfortable installed in a large custom residence or a light commercial application such as a campground, this product offers many features.

BLACKCOMB-HO's 5.1 series controller is a universal input, constant current electronic power source housed in a splash-proof case and comes standard with a "future-proof" expandability port for future upgrades or options.

A colour user interface allows for easy visual identification of remaining lamp life and any error or fault codes. The UV treatment system also incorporates QR codes to access lamp change information and videos via web access. Our axial flow 316L stainless steel, single-end reactors come with an integral port to allow for a future upgrade to a UV monitored system. If a monitor is not required, an integral visual glow plug is provided as an extra way to ensure that your UV lamp is illuminated. The single-end design allows for lamp change without the need to drain the reactor chamber. Low pressure, high-output (LP-HO) coated UV lamps offer a consistent output over their 10,000 hour rated life.

Flow rates of 21, 29, 49, 83 & 110 lpm (5.5, 7.5, 13, 22 & 28 gpm), in both 120V or 230V applications (same ballast, different IEC power cord), are offered in the NSF Class B BLACKCOMB-HO 5.1 series of products. For more information on NSF please visit their site at www.nsf.org.

BLACKCOMB UV System

Note: BLACKCOMB 5.1 High Output (non-NSF) system shown.

Equipment Modules >

NSF Class B BLACKCOMB-HO^5.1, Residential UV Systems, non-monitored

Model	LBH5-051B	LBH5-101B	LBH5-151B	LBH5-251B	LBH5-401B
NSF Class B Flow Rate (16 mJ/cm² @ 70%UVT)	5.4 gpm	7.6 gpm	13 gpm	22 gpm	28 gpm
	20 lpm	29 lpm	49 lpm	83 lpm	110 lpm
	1.2 m³/hr	1.7 m³/hr	3.0 m³/hr	5.0 m³/hr	6.4 m³/hr
Port Size	½" MNPT	¾" MNPT	1" MNPT	1" MNPT	1½" MNPT
Electrical	90-265V / 50-60Hz
Plug Type	American: Nema 5/15 - "1" suffix (i.e. LBH5-101B) European: CEE 7/7 - "2" suffix (i.e. LBH5-102B) British Standard: BS 1363 - "3" suffix (i.e. LBH5-103B) Australian/New Zealand: AS/NZ 3112 - "4" suffix (i.e. LBH5-104B)
Lamp Watts	18	34	45	67	101
Power (watts)	20	38	57	73	115
Chamber Material	316L Stainless Steel, A249 Pressure Rated Tubing, Polished & Passivated
Replacement Lamp	RL-210HO	RL-330HO	RL-420HO	RL-600HO	RL-950HO
Replacement Sleeve	RQ-210	RQ-330	RQ-420	RQ-600	RQ-950
Reactor Dimensions	3.5 x 11.7" (8.9 x 29.8 cm)	3.5 x 16.5" (8.9 x 41.8 cm)	3.5 x 20.0" (8.9 x 50.8 cm)	3.5 x 26.9" (8.9 x 68.3 cm)	3.5 x 40.7" (8.9 x 103.4 cm)
Controller Dimensions	8.6 x 4.2 x 4" (217.4 x 107.5 x 102 mm)
Maximum Operating Pressure	10.3 bar (150 psi)
Operating Temperature Range	2-40° C (36-104° F)
UV Monitor	Optional
Dry Contacts (solenoid ready)	Optional
4-20 mA Output	Optional
Lamp Age Counter	Yes
Lamp-Out Indicator (audible & visual)	Yes
Shipping Weight	4.5 kg (9.9 lbs)	5.4 kg (11.9 lbs)	6.0 kg (13.2 lbs)	6.5 kg (14.3 lbs)	8.0 kg (17.7 lbs)

UV Lamps

Part Number	Fits UV Model	Dimensions	Lamp Life (hours)	Base	Lamp Watts	Weight
RL-210HO	LBH5-051B	8.3" (210mm)	10,000	Blue	18	0.2kg (0.5 lbs)
RL-330HO	LBH5-101B	13.0" (330mm)	10,000	Blue	34	0.2kg (0.5 lbs)
RL-420HO	LBH5-151B	16.5" (420mm)	10,000	Blue	45	0.2kg (0.5 lbs)
RL-600HO	LBH5-251B	23.6" (600mm)	10,000	Blue	67	0.2kg (0.5 lbs)
RL-950HO	LBH5-401B	37.4" (950mm)	10,000	Blue	101	0.5kg (1.0 lbs)

Quartz Sleeves

Part Number	Fits UV Model	ID (mm)	OD (mm)	Length (mm)	Weight
RQ-210	LBH5-051B	20	22.5	646	0.2kg (0.5 lbs)
RQ-330	LBH5-101B	20	22.5	256	0.2kg (0.5 lbs)
RQ-420	LBH5-151B	20	22.5	466	0.2kg (0.5 lbs)
RQ-600	LBH5-251B	20	22.5	646	0.2kg (0.5 lbs)
RQ-950	LBH5-401B	20	22.5	996	0.5kg (1.0 lbs)

Controllers

Part Number	Fits UV Model	Electrical Rating	Weight
RCHO-56.12	LBH5-051B LBH5-101B LBH5-151B LBH5-251B LBH5-401B	90 - 265V / 50-60Hz	1.4kg (3.1 lbs)

Sensors

Part Number	Fits UV Model	Description	Weight
RSHO-B3.5	LBH5-051B LBH5-101B LBH5-151B LBH5-251B LBH5-401B	UV Monitor for BLACKCOMB-HO products.

Blackcomb Manual English

Blackcomb Manual French

Blackcomb Modules Manual English

NSF Class B BLACKCOMB English

NSF Class B BLACKCOMB French

Home screen

Lamp life remaining screen

Lamp expiration screen

Unsafe water screen

QR code screen

Optional Equipment Modules

Solenoid Module (MOD-SOL1)

Allows for a solenoid connection on LUMINOR BLACKCOMB (5.1 and 6.1 only) products (will work on lamp failure only on LUMINOR 5.1 systems)
Customer simply needs to purchase a NORMALLY CLOSED line voltage solenoid valve and affix the module’s supplied bare lead cord to the solenoid valve
Connect power cable to electrical outlet and the other lead to the “future-proof” expandability port on the controller

4-20 mA Module (MOD-420)

Allows for a 4-20mA connection on LUMINOR BLACKCOMB (5.1 and 6.1 only) products
This device will allow for a 4-20mA signal transfer of the UV output to a remote device such as a data logger or computer
Simply plug the supplied into the IEP expandability port on the UV sensor module (or daisy chain to any other module used in the system
No wire is supplied with this system, however 16-22 AWG is required

Remote Alarm (Dry Contacts) Module (MOD-RAM)

Allows for a remote connection on LUMINOR BLACKCOMB (5.1 and 6.1 only) products
Allows for the remote installation of alarms, lights, PLC input, data logger, flow control, etc.
Simply plug the supplied into the IEP expandability port on the UV sensor module (or daisy chain to any other module used in the system
Supplied with three screw terminals (NO, NC & common) to connect to the receiving end of the dry contacts
As the distance required is unknown, no wire is supplied with the system, however 16-22 AWG is required

SHERPA

Wireless remote monitoring within the home….works on all LUMINOR (both 5.1 and 6.1) products
Integral audible alarm and visual indicators for “GOOD”, “CAUTION”, and “ALARM” conditions
Hard wire option only (wall wart) (battery option to follow)
Supplied with both the receiver and transmitter which is connected to the IEP port of the controller as are other modules
Flexible mounting configurations
Can install up to 5 receivers per transmitter

Module Splitter

This module helps organize all the modules connected to BLACKCOMB 5.1/6.1 systems. Up to 3 modules, including sensors, can plug into the MOD-SPLITTER at once. Managing modules becomes easier as they are all plugged into one, central location.

UV Concierge Module (MOD-APP)

• Integrated WiFi solution for WEB, ANDROID, and iOS (Apple)
• GUI interface matches current UV display for brand recognition
• Easy set-up and login with integrated QR codes
• Data logging capabilities (i.e. UV output over time)
• Safe & protected, cloud-based data management
• Monitor just one system, or ALL the systems that you may service
• FCC compliance

Ultrasonic Flow Meter Module

LUMINOR’s ULTRASONIC FLOW METER provides accurate, real-time flow monitoring using a technology that provides failsafe operation. When the system senses “no-flow” or "low-flow" conditions, a signal is sent to the main controller and automatically reduces the power output to the UV lamp, thereby reducing the overall power consumption. Benefits include energy savings, reduced quartz sleeve fouling and cooler operating temperatures.

Dealer Programming Module

As a dealer or distributor of UV systems, you realize the importance of making sure that your customers replace their UV lamps on a regular basis. Other systems come with lamp change reminders, but they do not ensure the repeat business comes back to you!

LUMINOR's BLACKCOMB line of UV systems come with the industry's first Dealer Programming Module. This module allows you to customize the controller's display in the field!

Interested in Luminor's BLACKCOMB HO 5.1 B Product?

Where To Buy >

LIMITED WARRANTY STATEMENT

Products manufactured by LUMINOR Environmental Inc., (LUMINOR) are warranted to the original user only to be free of defects in material and workmanship for a period as specified below. This warranty only applies to the original purchaser and is not transferable.

UV SYSTEMS

Ten (10) year Limited Warranty on the stainless steel reactors, from the date of original purchase, or installation (proper documentation required for verification).

POOL UV SYSTEMS

Pool UV Systems are covered by a Three (3) year Limited Warranty, from the date of original purchase (proper documentation required for verification). See Pool UV manual for more information.

UV LED SYSTEMS

GLACIER UV LED modules are covered by a One (1) year Limited Warranty, from the date of original purchase (proper documentation required for verification).

ELECTRONICS

Three (3) year Limited Warranty on the ballasts and controllers, from the date of original purchase, or installation (proper documentation required for verification).

UV LAMPS, UV SENSORS & QUARTZ SLEEVES

One (1) year Limited Warranty on all LUMINOR ultraviolet lamps, UV sensors and quartz sleeves from the date of original purchase, or installation (proper documentation required for verification).

LUMINOR warrants that it will repair, replace or refund, at LUMINOR’s sole option, any ultraviolet system or component that is defective in materials or workmanship for the period as outlined above, subject to the “Limitations of Warranty” as outlined below. LUMINOR’s liability under this warranty shall be limited to repairing or replacing at LUMINOR’s option, without charge, F.O.B. LUMINOR’s factory or authorized service depot, any product that LUMINOR manufactures. LUMINOR will not be liable for any costs of removal, installation, transportation, or any other charges which may arise in connection with a warranty claim. Products which are sold but not manufactured by LUMINOR are subject to the warranty provided by the manufacturer of said products and not by LUMINOR’s warranty. LUMINOR will not be liable for damage or wear to products caused by abnormal operating conditions, accident, abuse, misuse, unauthorized alteration or repair, or if the product was not installed in accordance with LUMINOR’s printed installation and operating instructions.

LIMITATIONS OF WARRANTY

This warranty does not apply to any of the following:

Water Quality Parameters lie outside of the following range:

Hardness > 120 mg/L (7 gpg)
Iron > 0.3 mg/L (ppm)
Manganese > 0.05 mg/L (ppm)
Tannins > 0.1 mg/L (ppm)
Turbidity > 1 NTU
Transmittance (UVT) < 75% (50% for Low-UVT systems)

A product that has been incorrectly installed according to the owners manual.

A product that has been modified in any manner, unless approved by the manufacturer.

A product where the serial number has been altered defaced or removed.

Damage caused by the use of parts that are not compatible, suitable and/or authorized by LUMINOR for use with the product (e.g. non-original lamps or sleeves).

Damage caused during shipment of the product.

Water damage is found inside ballast housing or controllers.

Product is installed outdoors in direct contact with the environment (rain).

Product is installed in freezing temperatures.

Product is used in conditions that exceed LUMINOR’s specifications.

TO GET WARRANTY SERVICE

To obtain service under this warranty, you must first contact where the product was originally purchased to obtain a Warranty Return Authorization. You will require proof of purchase and installation date, failure date, and any other requested data. Unless otherwise provided, the Dealer or Distributor will contact LUMINOR for instructions on returning the product. Any defective product to be returned to LUMINOR must be sent freight prepaid; documentation supporting the warranty claim and/or a Return Goods Authorization must be included if so instructed.

LUMINOR WILL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES caused by fire, flood, or acts of God, LOSSES, OR EXPENSES ARISING FROM INSTALLATION, USE, OR ANY OTHER CAUSES. THERE ARE NO EXPRESS OR IMPLIED WARRANTIES, INCLUDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH EXTEND BEYOND THOSE WARRANTIES DESCRIBED OR REFERRED TO ABOVE.

THIS LIMITED WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY MADE BY LUMINOR WITH RESPECT TO THE PRODUCT, AND IS GIVEN IN LIEU OF ANY OTHER WARRANTY. TO THE EXTENT ALLOWED BY APPLICABLE LAW, ANY AND ALL EXPRESS OR IMPLIED WARRANTIES NOT SET FORTH HEREIN ARE WAIVED AND DISCLAIMED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. LUMINOR LIABILITY UNDER THIS LIMITED WARRANTY IS LIMITED SOLELY TO THOSE LIABILITIES SET FORTH ABOVE. IN THE EVENT THAT ANY PROVISION OF THIS LIMITED WARRANTY SHOULD BE OR BECOME INVALID OR UNENFORCEABLE UNDER APPLICABLE LAW, THE REMAINING TERMS AND CONDITIONS HEREOF SHALL REMAIN IN FULL FORCE AND EFFECT AND SUCH INVALID OR UNENFORCEABLE PROVISION SHALL BE CONSTRUED IN SUCH A MANNER AS TO BE VALID AND ENFORCEABLE.

WARRANTY REGISTRATION

It is imperative that you complete the warranty registration process. This not only registers your UV disinfection system for the provided manufacturer’s warranty, but also allows the factory to provide you with any important product updates or technical bulletins concerning your product. The registration process is simple and can ONLY be done online. When registering please ensure that ALL information is filled in, including a valid e-mail address. PLEASE NOTE: This information is for the sole purpose of technical support for your disinfection system and will not be used, or sold, to any other organization for any other purpose. Please refer to LUMINOR’s Privacy Policy statement at luminoruv.com/privacy-policy for further information.